Home > Products > K1 > K1 Specifications

K1 Specifications

  1. Cubicles System shall be KYISSA K.1. model i.e. Floor Mounted, Overhead Braced.
    Leg support to be 100 x 25 R.H.S. secured to the frontal and floor with angle brackets.

  2. Panels i.e. divisions, doors, frontals and nibs to be manufactured from 33mm prelamintated Structural Board, edge finished with 2mm high impact, solid colour P.V.C.

  3. Head rail and other support aluminium channels and leg sections to be natural clear anodised finish.

  4. Door Hardware shall be standard KYISSA hat/coat hook, turnbolt and indicator, escape staple and bumper in satin chrom finish.

  5. Hinges shall be KYISSA "level line" safety lift off gravity hinges, clear anodised, set in hold open position.

  6. Dimensions are standard 900mm wide cubicle 1500mm deep and mounted, 200mm above the floor. Drivision and door height to be 1800mm. Frontal heights 2000mm overall.

Notes to the Specifier

  1. Aluminium/door furniture can be powder coated if required.

  2. In the event of wet areas, high abuse and public areas the panels may be required to be Solid Grade Phenolic Core both 18mm thick. Edging is generally not applied to Solid Grade. Panels can be pre-decorated or raw and/or painted.

  3. Item 1, Cubicle System. The system style will need to be nominated i.e. style - Kyissa "Kyissa K.1.A. - Square Edged Laminated".
    Item 2, Panels. Requires the nomination of the material to be used i.e. 33mm prelaminated Structural Board etc.

Various styles of the K.1. Systems

K1.A. Square Edged Laminated Board 18mm or 33mm.
K1.G. Square Edged 13mm Compact Laminate (Phenolic Resin)

Specifications

 

* Required fields. Your privacy is assured.